Loctite 4310 UV curing adhesive for medical devices

  • Loctite 4310 Colle UV cyanoacrylate spéciale dispositifs médicaux




  • Provides very rapid fixturing, fillet cure or surface cure
  • Suitable for plastics, metals and rubbers
  • Qualified to ISO 10993 protocol for use in disposable medical devices

Possibilities of presentation

  • Capacity: 28 g or 454 g

Description of Loctite 4310 cyanoacrylate UV adhesive

Loctite 4310 is a transparent, light yellow-green to dark blue-green ethyl cyanoacrylate/UV liquid adhesive with photo initiator, for bonding requiring very rapid fixturing, fillet cure or surface cure.

This cyanoacrylate glue cures under UV light but also under visible light:

  • Immediate fixation
  • Polymerization of glued surfaces and overhangs

It is recommended for plastics, rubbers and metals.

The UV light cure property facilitates rapid curing of exposed surface areas, minimizing blooming which often happens with solvent borne accelerators. This UV glue is fluorescent so that you can control its application.

This Loctite UV activated glue can be used in disposable medical devices and it has been qualified to ISO 10993 protocol.

This adhesive is also available in a thick version (high viscosity): Loctite 4311. Contact us for any information or quotation request.

Video - How to use a UV curing adhesive ?

For more information, see our page on the advantages and applications of industrial UV adhesives.

Technical data

Colour Transparent, light yellow-green to dark blue-green
Capacity 28 g or 454 g
Chemical Ethyl cyanoacrylate with photo initiator


Exists in a thick version (high viscosity) : Loctite 4311


Visible light

UV (365 nm and 405 nm)

Temperature resistance +180°C
Other curing system Humidity
Curind depth 4 to 6 mm
Fixing time

Visible light : < 10 sec

UV : < 5 sec