ADEZIF TF 29 Scrim transfer tape – double-sided reinforced tape

  • Ruban adhésif transfert grille armé Adezif TF 29




  • Polyester scrim with good mechanical resistance
  • Bonds to low surface energy surfaces (PP, PE...)
  • Good resistance to water and solvents

Possibilities of presentation

  • Available widths : up to 1,200 mm
  • Cut in rolls, pieces

What are the characteristics of ADEZIF TF29 ?

ADEZIF TF 29 tape is a double-sided transfer tape composed of a very resistant polyester grid embedded in an aggressive rubber adhesive.

The woven backing material makes it possible to limit the stretching of the bonded substrates while maintaining the adhesive properties that make the transfer tape successful.

Indeed, on uneven surfaces the high power wetting agent of the transfer tape allows for a deeper bonding that adapts to the irregularities of the bonding surface.

This transfer tape is recommended for bonding on :

  • Flexible material
  • Rigid parts in polyethylene and polypropylene
  • Reticulated and unreticulated PE foam
  • Plastazote, polychloroprene and polyurethane

ADEZIF TF 29 transfer tape is largely used for bonding on floor slabs, carpets or die-cut pieces (foam, PU, PET, PP). It is also used in some laminating operations where a strong adhesive is necessary.

Typical properties

Colour Clear with a yellow silicone-coated liner 
Thickness 0.15 mm
Length 50 meters
Backing material Reinforced woven polyester grid
Type of adhesive Rubber
Temperature resistance 110°C continuously, 140°C peak temperature
Conversion Cut in rolls, pieces
Available widths Up to 1,200 mm